Bunny Girl

Bunny Girl

This is a tutorial solely written by me on August 25, 2014 & © Rie and is from my own ideas. If it bears a resemblance to another then it is strictly coincidental. Do not claim as your own nor place on any website, blog, or any other place without my permission. You may share my tuts but link it back to my blog.

First off I am using psp x3. This assumes you have knowledge of the program and can understand the process within the program. I am using a PTU Tube by Marco Gulagione Bunny which you must have a license to use from this artist. Scrap Kit is a PTU by Black Widow Creationz called MsEvilEmily.

SO Now Let’s Get Started

~1~

First & Foremost make sure you save often so you do not lose your project and have to start over again. Open your tube image & elements you’re going to use and minimize to the bottom.

Open a new 600x600 transparent image.

~2~

If using the same scrapkit as me then use PP7. Otherwise use the paper of your choosing.

~3~

Next c/p tube image and place on the right side like mine. Then duplicate and move over to the left and resize to 50%.

 ~4~

Next Effects/3D/Drop Shadow use the following settings on everything unless otherwise stated. OV 10 H 10 AO 50 Blur 5.00 color-#000000

~5~

Next c/p EL4 and place between the two girls like mine. Image resize to 40%. Effects/3D/Drop Shadow and only change the 10’s to a 5 everything else remains the same. Next c/p EL5 and place up on the top in the middle. Image/resize 80%. Move down to bottom like mine. Lower opacity to 85.

~6~

Copy/paste EL23. Place in the lower left hand corner behind the small bunny girl. Use the last drop shadow. C/P EL32. Image/resize 50. Place above the tombstone in the upper left hand corner.

~7~

C/P EL 11. Image/resize 30%. Place in the lower right hand corner. Use the same drop shadow as the last.

~9~

Next add your copyright info.

License & Watermark.

And name or saying on tag.

Save and your done.

I hope you enjoyed my tut!

How To Desaturate & SaturateAn Image Properly!

How To Desaturate & Saturate An Image Properly!

This is a tutorial solely written by me on January 5, 2014 & © Rie and is from my own ideas. If it bears a resemblance to another then it is strictly coincidental. Do not claim as your own nor place on any website, blog, or any other place without my permission. This is written for Celineart and has my permission to allow her staff to use as reference. You may share my tuts but link it back to my blog.

First off I am using Adobe Photoshop. This assumes you have knowledge of the program and understand the process within the program. I am using a PTU Tube by Celinart Pinup L.E. Viorotica for this tutorial which you must have a license to use from this artist.

 SO Now Let’s Get Started

~1~

First & Foremost make sure you save often so you do not lose your project and have to start over again. Open your tube image and hold shift + D. Close the original image so you do not ruin the original.

~2~

Next if you do not have 2 layers duplicate the image and then you should have 2 layers in the same image. Now I want to make this as painless as possible. Close off your duplicated layer and make sure you’re on the original layer.

~3~

The quickest way to desaturate your image is go up to Image-Adjustnents-Desaturate. See ScreenShot below.

~4~

But honestly the better way to is by adjustment layer option this way if you decide you would like a little color back in your image you can do that with this way where the first way I discussed and showed you is permanent. The adjustment layer way you go to Image-Adjustment-Hue/Saturation. A new window might pop open depending on what version you are using. No matter what you will see Saturation slide bar all the way to the left so it shows -100. Click OK and then you see how simple it really is. See Screen Shot below.

~5~

Now that you have finished this part of the tutorial make sure you save and continue on with your image until you are done then add © info and your good to go. If you have any questions or concerns please feel free to send me an email which is hyperlinked to ©Rie at the beginning.

Tysvm for using my tut and visiting my blog. Please send others to it as well and visit back often.

Rie’s Dezines

Celinart Viorotica

Blue Lace

This is a tutorial solely written by me on December 14, 2013 & © Rie and is from my own ideas. If it bears a resemblance to another then it is strictly coincidental. Do not claim as your own nor place on any website, blog, or any other place with my permission. You may share my tuts but link it back to my blog.

First off I am using psp x3. This assumes you have knowledge of the program and can understand the process within the program. I am using a PTU Tube by Celinart Pinup L.E. Viorotica which you must have a license to use from this artist. Scrap Kit is a PTU by Develish Dezines called BlueLace.

 SO Now Let’s Get Started

~1~

First & Foremost make sure you save often so you do not lose your project and have to start over again. Open your tube image & elements you’re going to use and minimize to the bottom.

Open a new 650x650 transparent image.

~2~

If using the same scrapkit as me then use paper3. Otherwise use paper of your choosing.

~3~

Next c/p tube image and resize to 60%. Place on right side like mine. Layers-Duplicate and image resize to 70%. Place on left hand side like mine.

~4~

Next Effects/3D/Drop Shadow use the following settings on the bigger tube. OV-79 H-2 AO-2 Blur-17.05 color-#d26a0e

~5~

On the smaller tube use the following settings. Ov-82 H-19 AO-18 Blur-3.89 color-#cca6a7

~6~

Next c/p element84 make sure you are on paper layer. Lower Opacity to 34. Next c/p element2 make sure your on bubble layer. Image/resize 80%. Move down to bottom like mine. Lower opacity to 60.

~7~

Copy/paste element55. You should still be on the last layer. Image/resize 60% and place in upper left hand corner. C/P element60. Image/resize 60. Place next to smaller tube like mine.

~8~

C/P element98. Image/resize 40%. Lower opacity to 85 and place in the middle of the tag like mine. C/P element117. Image/resize 30 and place in middle bottom like mine. Effects/3D/DS default settings color black.

~9~

Next add your copyright info.

License & Watermark.

And name or saying on tag.

Save and your done.

I hope you enjoyed my tut!

BJ Merry Christmas

PUT FB Group and Profile Tags

PUT FB Group and Profile Tags Facebook group and profile tags! This tut was written by ©Rie on July 19, 2012. This is from my own ideas and any resemblance to another is coincidence. You may share my blog links with others but you may not steal or place on any other website without my permission. This has been copyrighted so please do not use illegally. Myows® stands for "My Original Works" OW 47556: Now before we begin: You are under no circumstances allowed to repost this on any website, blog or any other form of site. By doing this you are in direct violation of my copyright and if found out will be prosecuted to the fullest extent. DO NOT TRY IT! Supplies Needed: You need a working knowledge of psp. I used psp3 but any will work. First find a tube & Scrap Kit I used PUT Here ScrapHH PinUpToons Package 149 You must have a license to use this artwork. Font of Choice: I used Sentinel.

First notice we have two different sizes. One is for personal profiles which have to measure 851x315. The Group profiles must measure 802x200. This is done so they fit properly. Step One: Open new transparent image to your choosing. Open tube and scrap kit images you will be using. Copyright information and minimize all. If using mine then choose paper 1. Elements will be baskets, bath-salts, glitter-doodle-2, Flower-3, spray, & tubber. PUT 149-2. Step Two: C/P paper and paste as new image. The following will need to be resized to your satisfaction. C/P tube and paste as new image. Place on left hand side. See my tag for placement. Step Three: C/P tubber on bottom of image. C/P glitter doodle on the tub. C/P bath salts hanging from the knob. Step Four: C/P spray down on tub by hand erase what is not needed. C/P baskets and place in lower right hand side. C/P flower in upper right hand corner. Step Five: Add Copyright and Watermark Information. Image Add Borders 5 (#ffe3d9) or color of choosing.

Select Magic wand Tool and select border. Step Six: Effects/3D Effects/ Inner Bevel.

Selections/Select None. Step Seven: Choose font and place your name on tag. Save and you’re done. Hope you enjoyed the tut. Remember this works for both sizes.

JA Christmas is around the corner

Christmas is around the corner! This tutorial has been written by ©Rie on November 20, 2011 this is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence. You may share my blog links with others but you may not steal and place it on any website without my permission. This has been copyrighted so please do not use illegally. MCN: CHJ5A-64JDD-1CV5W Before we begin: You are under no circumstances allowed to post this on a web site, blog. By doing this you are in direct violation of our copyright and if found will be prosecuted. DO NOT TRY IT! Supplies Needed: Working knowledge of psp I used psp3 but should work in any version ScrapKit called 12 DOC 2009 by Jen PTU purchased HERE. I also used artwork by Joel Adams. You may use any font you choose (I used Christmas) Drop Shadow will remain the same Christmas is around the corner Step One: Save often so you do not lose it if something happens. Open up your image and copyright info and minimize. Download and extract your Scrap Kit to your folder. Open a new image 500 X 500. I used paper 36 in Day 1 copy and paste as new layer. Close paper choice. Step Two: Maximize your image of choice. C/P as new layer and place where you like. Effects/ 3D Effects/ Drop Shadow V/H 2 Opacity 50 Blur 5 Color Blk Find dropper and choose colors for borders. Now choose your elements. Step 3: I used ornament1, jinglebells1, candycane3, bling4. Place where you would like on your tag. Add Drop Shadow on each element. C/P candycane3 and resize to 30%. Place in lower left corner of image. (All layers unchecked) Grab your eraser tool (erase just over the top of her hand so it looks like she is holding it refer to my tag) Now c/p ornament1 resize 20%. Place in upper left corner. (Look at my tag 4 ref). C/P jinglebells1. Place on top under your star so it is hanging behind it. Step 4: Image add borders 10 I used #ec870f Click Ok Magic wand. Select your border. Effects/ 3D Effects/ Inner Bevel. Selections/ Select None. Step 5: Image add borders 5 I used #94b140 Click Ok Magic wand. Select your border. Effects/ 3D Effects/ Inner Bevel. Step 6: Repeat Step 4 Step 7: Image resize 500 all layers checked. Place copyright information. Choose Font and place name on image. Save and your done I hope you enjoyed the tut 

JA Back to school

It’s School Time This tutorial has been written by ©Rie on November 18, 2011 this is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence. You may share my blog links with others but you may not steal and place it on any website without my permission. This has been copyrighted so please do not use illegally. MCN: C31GP-YUSXJ-AMVV8 Before we begin: You are under no circumstances allowed to post this on a web site, blog. By doing this you are in direct violation of our copyright and if found will be prosecuted. DO NOT TRY IT! Supplies Needed: Working knowledge of psp I used psp3 but should work in any version Any ScrapKit of your choosing. I used FTU SK By Peace per her TOU’s You may email here at peacetags65@yahoo.com Special thanks to Pmarie Scraps for her CU products. http://petitemariedesigns.blogspot.com/ Special Thanks to Dark Creations for her CU Products. damndark@Gmail.com I also used artwork by Joel Adams. You may use any font you choose (I used Pieces NFI) Drop Shadow will remain the same It’s School Time! Step One: Save often so you do not lose it if something happens. Open up your image and copyright info and minimize. Download and extract your Scrap Kit to your folder. Open a new image 500 X 500. I used paper 2 copy and paste as new layer. Close paper choice. Step Two: Maximize your image of choice. C/P as new layer and place where you like. Effects/ 3D Effects/ Drop Shadow V/H 2 Opacity 50 Blur 5 Color Blk Find dropper and choose colors for borders. Now choose your elements. Step 3: I used butterfly2, foldedribbon, ribbon0. Place where you would like on your tag. Add Drop Shadow on each element. C/P butterfly2 and resize to 60%. Place in upper right corner of image. (All layers unchecked) Now c/p foldedribbon. Place on bottom middle. Under your image. (Look at my tag 4 ref). C/P ribbon0. Place on top under your image. Step 4: Image add borders 10 Click Ok Magic wand select your border. Effects/ 3D Effects/ Inner Bevel. Selections/ Select None. Step 5: Image resize 500 all layers checked. Place copyright information. Choose Font and place name on image. Save and your done I hope you enjoyed the tut 

How to script tut!

How to script tut This tutorial has been written by ©Rie on June 24, 2011 this is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence. You may share my blog links with others but you may not steal and place it on any website without my permission. This has been copyrighted so please do not use illegally. MCN: C713U-G6EWE-4MPXL Before we begin: You are under no circumstances allowed to post this on a web site, blog. By doing this you are in direct violation of our copyright and if found will be prosecuted. DO NOT TRY IT! Supplies Needed: Working knowledge of psp I used psp3 but should work in any version Scripting! Do your tag like you normally would. Step One: Open up your image and copyright info and make your tag. Add your drop shadows. Add your copyright info and license number. Step Two: Once you get to the point of you adding your name on the tag stop. Save image as .psp Now up at the top of your psp you will see this Step 3: Find your font you want to use and the size. The red circle button is the record button. That will start recording your new script. When you record all I want you to do is write your name and stop. Apply changes but do not change to vector yet! Step 4: Now find script in drop menu and click on blue paper. Then click on text editor! Step 5: A notepad will open with HTML coding. Copy and paste this exactly as it shows on the SS. Results = App.Do(Environment, 'ReturnLayerProperties') TagName = Results['General']['Name'] Now scroll down to the bottom and look for this right here. Replace u’Rie’ with this exactly TagName. Go to file and click save.. Step 6: Now go back to your tag and convert to vector after you have stretched it to shortened it to your liking. Hit the red record button again for the 2nd part of your script recording. Add your drop shadow to your name. Add borders if you choose. Save your script again but this time place an A like my SS below.

Naughty or Nice Tut

This tutorial has been written by ©Rie on June 2, 2011 this is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence. You may share my blog links with others but you may not steal and place it on any website without my permission. This has been copyrighted so please do not use illegally. MCN: CR82A-151RG-EMA9W Before we begin: You are under no circumstances allowed to post this on a web site, blog. By doing this you are in direct violation of our copyright and if found will be prosecuted. DO NOT TRY IT! Supplies Needed: Working knowledge of psp I used psp3 but should work in any version FTU SK By Cari Jaime I used Naughty or Nice HERE I also used artwork by Lorenzo Sperlonga (this is AOTM tube). You may use any font you choose (I used Sentinel) Drop Shadow will remain the same Am I naughty or nice! Step One: Open up your image and copyright info and minimize. Download and extract your Scrap Kit to your folder. Open a new image 500 X 500. I used paper 17 copy and paste as new layer. Close paper choice. Step Two: Maximize your image of choice. C/P as new layer and place where you like. Effects/ 3D Effects/ Drop Shadow V/H 2 Opacity 50 Blur 5 Color Blk Find dropper and choose colors for borders. Now choose your elements. Step 3: I used Glitter 3, Ribbon 3, Fuzzy 3, and lipstick. Add Drop Shadow on each element. C/P Ribbon 3 and resize to 90%. Place up on top of image. (All layers unchecked) Now c/p lipstick and resize to 80%. Place on the left side. (Look at my tag 4 ref). C/P glitter 3 resize to 80%. Place on left side behind your image. C/P fuzzy 3 resize to 80%. Place in upper right corner over ribbon. Step 4: Image add borders 10 Click Ok Magic wand select your border. Effects/ 3D Effects/ Inner Bevel. Selections/ Select None. Step 5: Image add borders 5 Magic wand select your border. Effects/ 3D Effects/ Inner Bevel. Same as above. Selections/ Select None. Step 6: Image resize 500 all layers checked. Place copyright information. Choose Font and place name on image.

Writing Tuts L2 (How to make proper ScreenShots)

This tutorial has been written by ©RieMRuby&DiamondDezigns on April 1, 2010 this is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence. You are not allowed to share or forward this lesson to anyone and you may not place it on any website without my permission. This has been copyrighted so please do not use illegally. MCN: C6N36-7P8JU-SVJ4W Lesson 2 Learning to take proper screenshots Do not share these lessons outside of the group this includes but is not limited to: a blog, website, email or any other form electronic or printed. Before we begin This Lesson was written by ©RieMRuby&DiamondDezigns This Lesson belongs to RubyNDiamondDezigns You are under no circumstances allowed to post this on a web site or share the lesson outside of this group. By doing this you are in direct violation of our copyright and if found will be prosecuted. DO NOT TRY IT! Beginner Lesson 2: This will teach you how to take proper screenshots! Here you will be introduced to Snagit! I have found one that actually works well. Screenshots can really enhance your tut! I am sure you have seen screenshots that were all distorted looking to the point you could not read them properly. Ok please go here and download the program. http://www.4shared.com/file/HZo5TfSx/for_screenshots_SNAG_IT.html (This link came from Rie) DO NOT share it outside the group! After downloading then unzip it you should see a setup file with a key generator. Open the key generator copy the serial number have in it. Now double click the setup so you can install the program. You will click next each time you will not change anything on the setup. When the setup is finished a new screen will open up for you. On the right you find the word unlock now click on it. If you cannot find it then look for it under Tools. Place your name and serial # that you copied earlier from the key generator. On the next screen uncheck copy my software key to the online form now close. On the next screen make sure you select NO. You should see a screen asking you to take a tour you can close that. You should have the Snagit program open on your desktop if you don’t then open it now. At the top find TOOLS and click the...Program preferences. Then select program options select: use tray icon. ( Please don't change anything else ) At the tab....Updater options......unselect: enable automated update checking. ( Note ~ DO NOT UPDATE EVER OR IT WON’T WORK ANYMORE) Close all screens now. Now it is time to play. Open psp and have an image open in it. You are going to take a screenshot of it. This is how you do it. (ctrl+shift+ P) then hold down your left mouse and drag it to select what you want a shot of. When you are finished let go of the mouse button and another screen will open with what you just captured. On the left you see the TOOLS. These are options for you to use on your screenshots. So if you wanted to added text like I did on my screenshots above click the A. Now that you are finished click save-as. Name it and change to JPEG. See that was not hard. I am in hopes that you learn to love this program as much as I do. Huggs, Rie N Chloe The requirement to pass this lesson: For this lesson play with your new program. Do some screenshots in PSP of the following: Image Resize screen Effects 3D Effects Layers New Raster Layer screen Place text, an arrow or two, and your watermark. Send these to your MOD In the Subject line put your name Lesson 2. After it is approved you will receive lesson 3 Rie

Writing Tuts L1

Lesson 1 Creating a Personal Disclaimer Do not share these lessons outside of the group this includes but is not limited to: a blog, website, email or any other form electronic or printed. Before we begin This Lesson was written by ©Rie This Lesson belongs to Rie You are under no circumstances allowed to post this on a web site or share the lesson outside of this group. By doing this you are in direct violation of our copyright and if found will be prosecuted. DO NOT TRY IT! Beginner Lesson 1: There are a few things to keep in mind as you prepare for each lesson as well as your tut writing process: 1) Not all writers have the same style that’s what makes each so unique! What works for me may not for you. 2) Make sure you have everything you need: a pen, paper, comfy place to work and maybe a drink or snack (can’t think if tummy growling huh!). 3) SAVE SAVE SAVE…we never know when we may lose power! 4) Make sure you right down all of your steps as you go along such as sizes, colors, plugins or effects and their settings, names of tubes or sources. Make these for you, they are the rough draft, but here is NOTHING worse than getting finished and realizing you have NO clue what you did! 5) Breathe this is supposed to be fun! If you don’t enjoy it no one else will either . Now with that in mind let’s get to your 1st lesson… Good Luck! We are going to create our disclaimer everyone’s is different some are centered, some are aligned right, that all depends on your preference and were you will be posting your tutorials. Below you will find several different variations to review before you begin. Assignment Requirement: For your Assignment you will create your own wording for your personal header and disclaimer! When you are finished please send to your Mod per your welcome letter…Remember to add your name and the lesson you are sending in: Rie - Beginner Lesson #1. When approved you will receive your next lesson Examples: 1) This Tutorial is my own creation, (YOUR NAME) any resemblance to any other is purely a coincidence. 2) This tutorial is written by ©YOUR NAME and is the property of YOUR SITE (Only if you have this info legally do you use this one). It cannot be used or placed on any other website without my written permission 3) This tutorial has been written by Rie on March 19, 2010. This is from my own creation and ideas if it shares any resemblance to any others it is just a coincidence. You are not allowed to share or forward this lesson to anyone and you may not place it on any website. This tutorial is a GIFT given freely. You can do this! ©Rie