Sunday, August 11, 2013


Sexy Ahoy 8.11.13


Sexy Ahoy

I made this TUT using PSP X2
However any version can be used (some may need changes).
This tutorial has been written by ©Rie on August 11, 2013.
This is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence.
You may share my blog links with others but you may not steal and place it on any website without my written permission.

Before we begin you will need the following:

A working knowledge of PSP.
Any scrapkit of your choosing.
I used a PTU kit called Devilish Dezines Ahoy
                 Tube I used PTU © Sexy Poser with license from Ismel Rac




Step 1:
Save often so you do not lose your work.
Settings will remain the same unless specified.
Open scrapkit and extract to folder.
Open new image 500 X 500 transparent.
Find your tube of choice and minimize for later.
Step 2:
Open element18 or a element of your choice.
Copy/paste into your image as new layer and close.

Step 3:
Effects/Drop shadow 10.10.50.5.00 black. Click OK.
Maximize your tube copy/paste into your image as new layer. Close.
Image resize 70%.
Place in the right hand corner like mine.
Add drop shadow same settings.

Step 4:
Open elements I used Element24 resize to 30%.
Copy/paste into your image.
Place up on the lower left had side of your image.
Add drop shadow same settings as above.
I used element23 resize to 20%. Place on upper right hand side of fence. Add drop shadow same settings as above.

Step 5:
I used element45. Copy/Paste into your image.
Resize to 30%. Place in lower left hand corner of tag by the ship and move down so it’s behind the ship.
Add drop shadow same settings. I used element8. Copy/Paste into your image. Resize to 20%. Place in lower left hand corner behind ship. Add drop shadow same settings. I used element10. Copy/Paste into your image. Resize to 10%. Place in the middle of the fence like mine. Add drop shadow same settings. I also used element42. Resize to 10%. Place in the lower right corner like mine. Add drop shadow same settings.

Step 6:
Add copyright information.
License and your tag information.
Choose font place name and save.
Font I used was Rapscallion.
I hope you have enjoyed this tut.


Friday, August 9, 2013

Precious Pink Julie


Precious Pink


Precious Pink

I made this TUT using PSP X2
However any version can be used (some may need changes).
This tutorial has been written by ©Rie on August 8, 2013.
This is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence.
You may share my blog links with others but you may not steal and place it on any website without my written permission.


Before we begin you will need the following:

A working knowledge of PSP.
Any scrapkit of your choosing.
I used a FTU kit called HeartBreaker 
Tube I used PTU © bitsnbobs with license from PFD




Step 1:
Save often so you do not lose your work.
Settings will remain the same unless specified.
Open scrapkit and extract to folder.
Open new image 500 X 500 transparent.
Find your tube of choice and minimize for later.
If using the same kit then chose paper 2.
Right click copy/paste into new image as new layer and close.

Step 2:
Open frame heart or a frame of your choice.
Copy/paste into your image as new layer and close.
Image resize to 75%. Make sure resize all layers is unchecked. Click OK.




Step 3:
Effects/Drop shadow 10.10.50.5.00 black. Click OK.


Maximize your tube copy/paste into your image as new layer. Close.
Image resize 30%.
Place in the middle like mine.
Add drop shadow same settings.

Step 4:
Open elements I used Hearts2. Copy/paste into your image.
Place up on the top of your image.
Add drop shadow same settings as above.
I used Bunny resize to 30%. Place on left hand side of frame like mine is. Add drop shadow same settings as above.

Step 5:
I used Heart3. Copy/Paste into your image.
Resize to 30%. Place in lower right hand corner of frame like mine.
Add drop shadow same settings. I used Heart1. Copy/Paste into your image. Resize to 30%. Place in lower left hand corner of frame like mine. Add drop shadow same settings. I used Mailbox. Copy/Paste into your image. Resize to 30%. Place in lower right hand corner of tag like mine. Add drop shadow same settings.

Step 6:
Add copyright information.
License and your tag information.
Choose font place name and save.
Font I used was Showcard Gothic.
I hope you have enjoyed this tut.


Sunday, July 14, 2013

This is a Tube by Spazz with SK Devilish Dezigns Exclusive released soon!

CT Tag By: Rie
For: Devilish Dezigns
Made: July 14, 2013

Tuesday, June 25, 2013

TrishasRealm 6.25.13

TrishasRealm

I made this TUT using PSP X2
However any version can be used (some may need changes).
This tutorial has been written by ©Rie on June 25, 2013.
This tut was written for my CT.
This is from my own creations and ideas if there is any resemblance to any others it’s just a coincidence.
You may share my blog links with others but you may not steal and place it on any website without my permission. This has been copyrighted so please do not use illegally.


MCN:  CLYZF-QGSKE-11QA6


Before we begin you will need the following:

A working knowledge of PSP.
Any scrapkit of your choosing.
I used a PTU kit called TrishasRealm 
Tube I used PTU © PinUpToons with license from CDO



Step 1:
Save often so you do not lose your work.
Settings will remain the same unless specified.
Open scrapkit and extract to folder.
Open new image 500 X 500 transparent.
Find your tube of choice and minimize for later.
If using the same kit then chose paper 4.
Right click copy/paste into new image as new layer and close.

Step 2:
Open frame1 or a frame of your choice.
Copy/paste into your image as new layer and close.
Image resize to 65%. Make sure resize all layers is unchecked. Click OK.

Step 3:
Effects/Drop shadow 10.10.50.5.00 black. Click OK.
Maximize your tube copy/paste into your image as new layer. Close.
Image resize 65%.
Place to the left like mine.
Add drop shadow same settings.


Step 4:
Open elements I used element19. Copy/paste into your image.
Resize to 35%. Place up on the left hand top corner of frame.
Add drop shadow same settings as above.
I used element47 resize to 90%.
Place behind tube and frame. Erase what is showing outside frame.

Step 5:
I used element4. Copy/Paste into your image.
Resize to 30%. Place in lower right hand corner of frame like mine.
Image free rotate left, free 45.00.



Add drop shadow same settings.

Step 6:
Add copyright information.
License and your tag information.
Choose font place name and save.
Font I used was Vivaldi.
I added a border to mine as well select border with magic wand effects inner bevel.





Selections. Select None.
I hope you have enjoyed this tut.


Thursday, August 30, 2012

Scrap It Studio

Scrap It Studio Check out this cool new exclusive tagger size FAN FREEBIE kit at Scrap It Studio - https://www.facebook.com/scrapitstudio - just like her page - click on the Fan Freebie link - and grab the kit

Sunday, July 22, 2012

PUT FB Group and Profile Tags

PUT FB Group and Profile Tags Facebook group and profile tags! This tut was written by ©Rie on July 19, 2012. This is from my own ideas and any resemblance to another is coincidence. You may share my blog links with others but you may not steal or place on any other website without my permission. This has been copyrighted so please do not use illegally. Myows® stands for "My Original Works" OW 47556: Now before we begin: You are under no circumstances allowed to repost this on any website, blog or any other form of site. By doing this you are in direct violation of my copyright and if found out will be prosecuted to the fullest extent. DO NOT TRY IT! Supplies Needed: You need a working knowledge of psp. I used psp3 but any will work. First find a tube & Scrap Kit I used PUT Here ScrapHH PinUpToons Package 149 You must have a license to use this artwork. Font of Choice: I used Sentinel.
First notice we have two different sizes. One is for personal profiles which have to measure 851x315. The Group profiles must measure 802x200. This is done so they fit properly. Step One: Open new transparent image to your choosing. Open tube and scrap kit images you will be using. Copyright information and minimize all. If using mine then choose paper 1. Elements will be baskets, bath-salts, glitter-doodle-2, Flower-3, spray, & tubber. PUT 149-2. Step Two: C/P paper and paste as new image. The following will need to be resized to your satisfaction. C/P tube and paste as new image. Place on left hand side. See my tag for placement. Step Three: C/P tubber on bottom of image. C/P glitter doodle on the tub. C/P bath salts hanging from the knob. Step Four: C/P spray down on tub by hand erase what is not needed. C/P baskets and place in lower right hand side. C/P flower in upper right hand corner. Step Five: Add Copyright and Watermark Information. Image Add Borders 5 (#ffe3d9) or color of choosing.
Select Magic wand Tool and select border. Step Six: Effects/3D Effects/ Inner Bevel.
Selections/Select None. Step Seven: Choose font and place your name on tag. Save and you’re done. Hope you enjoyed the tut. Remember this works for both sizes.